Tag Archives: network

windows – net tools 5.0.70

download

Description

Net Tools is a comprehensive set of host monitoring, network scanning, security, administration tools and much more, a real swiss knife. The tools range from ip port scanners to Google PageRank Calculator’s.

Installation

Extract the zip file and right-click on the setup.exe and go to properties. Change the compatibility mode to Windows XP (Service Pack 3) and enable Run as Administrator:
nettools setup.exe properties

After this just start the setup.exe and click a few times on next.

Continue reading windows – net tools 5.0.70

FacebookTwitterGoogle+Share

linux – bro network security monitor

download bro
Before installing Bro, you’ll need to ensure that some dependencies are in place.

Required Dependencies

Bro requires the following libraries and tools to be installed before you begin:

To build Bro from source, the following additional dependencies are required:

Continue reading linux – bro network security monitor

FacebookTwitterGoogle+Share

windows – simple network commands

ipconfig /alldisplay information about all network interfaces currently in operation
ipconfig /displaydnsdisplay local DNS cache
arp -adisplay the ARP table
netsh wlan show profilesshow saved wireless profiles
netsh firewall set opmode disabledisable the firewall old style
netsh advfirewall set currentprofile state offdisable windows firewall
netsh  advfirewall set allprofiles state offdisable windows firewall
netsh wlan export profile folder=. key=clearexport wifi keys as plaintext in xml file
netsh interface ip show interfaceslist interface with id’s/mtu’s
netsh interface ip set address local static <ip> <mask> <gw> <id>set ip for interface
netsh interface ip set dns local static <ip>set DNS server for interface
netsh interface ip set address local dhcpset interface to use DHCP
netstat -anolist open connections
netstat -anop tcp 1netstat loop
netstat -an| findstr LISTENINGlist all listening ports
route printlist routing talbe
route add <dst_ip> mask <subnetmsk_gw_ip> metric <costmetric> if <int>add static ip route
nslookup
> set type=any
> ls -d <domain>
 DNS zone transfer
tftp -I <ip> GET <file on tftpserver>tftp file transfer
net view /domainshow hosts in current domain
FacebookTwitterGoogle+Share

linux – simple network commands

ifconfigdisplay information about all network interfaces currently in operation
ss | lesslist out all connections
watch ss -tplist all tcp connections
netstat -antshow all tcp connections
netstat -anushow all udp connections
netstat -tulpnshow all all connections with PIDs
lsof -idisplay all established connection
smb://<ip>/<sharename>access Windows smb share
mount -t smbfs //<ip>/ADMIN$ /<folder>mount Windows Admin share
smbclient -U <user> \\\\<ip>\\<share>mount Windows share
ifconfig eth# <ip>/<cidr>set ip and subnetmask
ifconfig eth#:<int> <ip>/<cidr>set virtual network interface
iwlist <int> scanwifi scanner
dig -x <ip>domain lookup for ip
host <ip>domain lookup for ip
host -t SRV _<service>_tcp.url.comdomain SRV lookup
route add default gw <gw ip>set gateway
export MAC=xx:xx:xx:xx:xx:xxchange MAC
ifconfig <int> hw ether <MAC> change MAC
macchanger -m <MAC> <int>change MAC on Kali or Backtrack
ifconfig eth# mtu [size]change MTU size
dig @<ip> domain -t AXFRDNS zone transfer
host -l <domain> <nameserver>DNS zone transfer
ip xfrm state listprint existing VPN keys
/var/log/messages | grep DHCPlist DHCP assignments
echo “1” > /proc/sys/net/ipv4/ip_forwardturn on ip forwarding
tcpkill host <ip> and port <port>block ip with port
echo “nameserver x.x.x.x” > /etc/resolv.confadd DNS server
ip addr add <ip>/<cidr> dev eth#adds ‘hidden’ interface
nmblookup -A <ip>get hostname for <ip>
FacebookTwitterGoogle+Share